FIELD SERVICE

REPLACEMENT OF THE THERMOCOUPLE ASSEMBLY (PN 18913)

1.Remove the bottom front panel and the upper and lower rear panels of the furnace. (Note the position of the vent louvers on the rear panels.)

2.Note and record the color and location of the wires on the thermocouple terminals located on the Main PC Board (Figure 5).

3.Remove the thermocouple wires from the thermocouple terminals on the Main PC Board (Figure 5).

4.Remove the clamp which secures the thermocouple to the ceramic terminal block located in the upper rear of the furnace (Figure 4).

5.Remove the heating plate wire which crosses over the thermocouple and bend it out of the way just enough to permit sliding the thermocouple out of the rear of the heating chamber (Figure 4).

6.Remove the insulating filler that covers the holes in the bottom of the upper section (Figure 4). Straighten the thermocouple wires where they were bent at a 90° angle.

7.Withdraw the thermocouple down into the lower rear of the furnace through the holes in the upper and lower sections. Discard thermocouple assembly.

8.Feed the new thermocouple from the lower rear of the furnace up through the holes in the upper and lower sections and into the upper rear of the furnace.

9.Bend the new thermocouple wires at a 90° angle approximately 3 - 3/8 inches (8.6cm) from the exposed tip of the thermocouple. Be sure that there are three ceramic insulating sleeves between the thermocouple tip and the bend. Insert the new thermocouple into the hole at the rear of the heating chamber.

10.Replace the heating plate wire that was removed in Step 3. Check that there is a ceramic insulating sleeve covering the thermocouple wires where they cross the heating plate wire. Replace the clamp that holds the thermocouple wires to the ceramic terminal block. Replace the insulating filler that covers the holes in the bottom of the upper section.

11.Connect the thermocouple wires to the thermocouple terminals on the Main PC Board. Observe the color coding you noted in Step 2.

12.Replace the front panel and the upper and lower rear panels. (Be sure the vent louvers on the rear panels protrude out and face down.)

25

Page 25 Page 27
Page 26
Image 26
Infinity L30, M30 manual Replacement of the Thermocouple Assembly PN
Page 25 Page 27

M30, L30 specifications

The Infinity L30 and M30 are two notable offerings from Infinity, a company renowned for its commitment to high-quality audio technology and innovative designs. These speakers are designed to cater to audiophiles and enthusiasts alike, providing an immersive listening experience.

The Infinity L30 is a floor-standing speaker that emphasizes powerful sound and a stylish form factor. One of its key features is the incorporation of Infinity’s proprietary EMIT (Electromagnetic Induction Tweeter) technology. This technology is known for delivering exceptionally clear high frequencies, allowing listeners to experience the finer details in their music. The L30 also features a robust bass reflex design, which enhances low-frequency response, resulting in a richer sound experience. The speaker's design typically includes a high-quality, wooden cabinet that helps to minimize unwanted vibrations while adding an aesthetic appeal to any room.

On the other hand, the Infinity M30 is a bookshelf speaker designed for more compact environments without compromising sound quality. It shares several technologies with the L30, including the EMIT tweeter, ensuring that high-frequency reproduction remains clear and detailed. The M30's design also includes a rear-firing bass port, which helps to improve the bass response, making it suitable for a variety of setups, whether they are part of a home theater system or a dedicated stereo setup. The speaker is designed for versatility, easily fitting into various decor styles while delivering impressive sound quality.

Both speakers benefit from Infinity’s meticulous engineering, ensuring that they provide an exceptional audio experience. Features such as high-efficiency drivers, a wide frequency range, and the inclusion of durable materials contribute to their performance and longevity. Users can expect these speakers to produce sound with great accuracy and depth, making them ideal for genres ranging from classical to modern pop.

In summary, the Infinity L30 and M30 are exemplary models that showcase Infinity’s dedication to producing high-performance audio solutions. With advanced technologies, such as the EMIT tweeters, and thought-out designs aimed at maximizing sound quality, both models make powerful additions to any audio setup, promising to elevate the listening experience for users. Whether for music or movies, the L30 and M30 are sure to impress with their sonic capabilities and visual appeal.
Top Page Image Contents