Infinity TSS-SAT1200 manual Introduction, Included, Planning Your System, Placement

TSS-SAT1200 OM 7/27/06 4:44 PM Page 3

INTRODUCTION

Infinity Total Solutions™

Infinity Total Solutions continues Infinity’s longstanding commitment to accurate sound reproduction. Our high-quality drivers, precision dividing networks and rigid, well-braced enclosures combine to deliver uncompromised performance in any multichannel home theater system. In addition, the TSS-SAT1200 is magnetically shielded for safe place- ment adjacent to a television.

INCLUDED

(1) Speaker (1) Adjustable	(1) Fixed wall
wall bracket	bracket

PLANNING YOUR SYSTEM

Before deciding where to best place your speakers, survey your room and study Figures 1 and 2.

Subwoofer

Left Front	Center	Right Front
Channel	Channel	Channel

		Couch
Left	Left Rear	Center Rear	Right Rear	Right
Surround	Channel	Channel	Channel	Surround
Channel				Channel

Figure 1. This overhead view shows a typical home theater plan. Left/right rear channels are for a 7-channel system. Center rear channel is for a 6-channel system.

Subwoofer
Right Front
Channel
Center
Channel
	Right
Left Front	Surround
	Channel
Channel
	Right Rear
	Channel
Left	Center Rear
	Channel
Surround	Left Rear
Channel	Channel

Figure 2. This figure shows an alternate layout, which may be more suitable for some rooms. Left/right rear channels are

for a 7-channel system. Center rear channel is for a 6-channel system.

PLACEMENT

NOTE: The TSS-SAT1200 can be placed directly on a shelf, or mounted on a wall using the included wall brackets.

As Left and Right Front Channels

For left and right front channels, place one satellite to the left and another to the right of the television, as shown in Figure 1. Since the speakers are magnetically shielded, you can place them very close to the TV without worrying about the magnetic field distorting the picture.

As Surround Channels

For left and right surround channels, place one speaker on the left and another on the right, to the side of or slightly behind the listening area. The surround speakers should be mounted at a height of between 5 ft. (1.5m) and 7 ft. (2m).

In 6- or 7-channel configurations, place the rear channel(s) behind the listening position, as shown in Figures 1 and 2.

NOTE: An Infinity powered subwoofer will add impact and realism to both music and film soundtracks. Contact your Infinity dealer for recommendations on subwoofer models for your application.

Mounting on Floor Stands

An optional floor stand is available, should you prefer to place your TSS-SAT1200 satellites on the floor; see your dealer or visit www.infinitysystems.com for more information.

TSS-SAT1200 3