Infinity manual Connections, 3TSS-SUB4000

CONNECTIONS

If you have a Dolby* Digital or DTS® receiver/processor with a low-frequency-effects (LFE) output:

If your receiver/processor has subwoofer outputs for the left and right channels:

• Set Low-Pass Switch to Off.

NOTE: In this case, you do not need to use a Y connector. Simply connect the LFE output on your receiver/processor to either the left or right input on the subwoofer.

• Set Low-Pass Switch to On.

NOTE: Some receivers have a single subwoofer output (do not confuse this with a single LFE output as described to the left). In that case,

it is recommended that you use a Y connector (not included) to maximize performance.

3TSS-SUB4000