Video Standard: when set to Auto, the projector attempts to automatically | . |
| |
pick the video standard based on the input signal it receives. (The video |
|
| |
standard options may vary depending on your region of the world.) If the |
| Video Standard | |
projector is unable to detect the correct standard, the colors may not look |
| ||
right or the image may appear “torn.” If this happens, manually select a |
|
| |
video standard by selecting NTSC, PAL, or SECAM from the Video Stan- |
|
| |
dard menu. |
| Active Iris | |
|
| ||
Active Iris: when on, the projector monitors the image brightness and mod- |
|
| |
ifies the light output if the image is dark, which improves black levels. In |
|
| |
Presentation mode, it looks at peak brightness, in Theater mode it looks at |
|
| |
average brightness. |
|
| |
Overscan: (Computer 1 and video sources only) removes noise around the |
|
| |
video image. |
|
| |
The following 4 options are for computer sources only: |
|
| |
Phase: adjusts the horizontal phase of computer 2, 3 and component (except |
|
| |
480i and 576i) sources. |
|
| |
Tracking: adjusts the horizontal scan of a computer source (except Com- |
|
| |
puter 1). |
|
| |
Horizontal / Vertical Position: adjusts the position of a computer source | Computer 2 |
| |
(except Computer 1) and Video 1 source (except 480i and 576i). | Computer 3 | ||
|
Computer 2: allows you to turn Sync on Green on for this source.
Computer 3: allows you to turn Sync on Green on for this source.
30
