Displaying a computer image
Remove the lens cap.
Press the power switch on the back of the projector to the on (I) position. The Power light on the Status Indicator Panel (page 15) lights green.
remove lens cap
press Power switch press Power button
Press the Power button on the top of the projector or the remote.
I | O |
|
|
2 
The Power light blinks green and the fans start to run. When the lamp comes on, the startup screen is displayed and the light is steady green. It can take a minute for the image to achieve full brightness.
?No startup screen? Get help on page 16. Turn on your computer.
The computer’s image should appear on the projection screen. If it doesn’t, press the Source button on the keypad or remote.
Make sure your laptop’s external video port is active.
Many laptops do not automatically turn on their external video port when a projector is connected. Usually a key combination like FN + F5 is used to turn the external display on and off. Refer to your computer’s documenta- tion to learn your computer’s key combination.
? No computer image? Get help on page 16.
1
turn on computer
activate laptop’s external port
10
