IN8606HD User’s Manual
Advanced 1 Features
Press the Menu button to open the OSD menu. Press the ◄► buttons to move to the Settings 2 menu. Press the ▲▼ buttons to move to the Advanced 1 menu and then press 
(Enter) or ►. Press the ▲▼ buttons to move up and down in the Advanced 1 menu. Press the ◄► buttons to enter and change setting values.
ITEM
Menu Position
Translucent Menu
Low Power Mode
Fan Speed
Lamp Hour Reset
Projector ID
ISF Mode
DESCRIPTION
Press the ◄► buttons to enter and select different OSD location.
Press the ◄► buttons to enter and select OSD background translucent level. Press the ◄► buttons to enter and turn Low Power Mode on or off.
Press the ◄► buttons to enter and toggle between Normal and High fan speeds. Note: We recommend selecting high speed in high temperatures, high humidity, or high altitude (higher than 1500m/4921ft) areas.
After replacing the lamp, this item should be reset. See page 33 for more information on Lamp Hour Reset.
Press the ◄► buttons to enter and adjust the two digit projector ID from 00 through 98.
Press the ◄► buttons to enter and adjust ISF parameters.
Note: This feature does not display in the menu system unless a IFS technician has enabled this feature.
