Page 29INF5520 Hardware Guide
Advanced OptionSel Adjust Enter Back Quit
< >
<
<
ADVANCED OPTION
INPUT RESOLUTION
BLACK LEVEL EXPANSION
GAMMA SELECTION
SCAN MODE
SCAN CONVERSION
FILM MODE
IR CONTROL
KEYBOARD CONTROL
TILING
HEAT STATUS
DATE AND TIME
SCHEDULE
MONITOR ID
DDC/CI
ADVANCED OPTION RESET
MIDDLE
2.2
UNDER SCAN
PROGRESSIVE
AUTO
ON
InputResoluon: sets the resoluon of the VGA input. This is only required when the tablet is unable to detect the VGA input resolu-
on correctly. Opons include: 1024 x 768, 1280 x 768, 1360 x 768, 1366 x 768, 640 x 480, 720 x 480, 852 x 480, 800 x 600, 1064 x
600, 720 x 576, 1400 x1050, 1680 x 1050, 720 x 400, 640 x 400, 1440 x 900, 1600 x 900 and Auto.
Black Level Expansion: reveals addional details in black/dark areas of video inputs. Opons include: Low, Middle, High and O
(default).
GammaSelecon:adjusts the gamma value of the image and opmizes image brightness and contrast. Opons include: Nave, 2.2
(default), 2.4 and S Gamma.
Scan Mode: removes noise around the edges of a video image. Opons include: Under scan (default for VGA sources) and Over scan
(default for video sources).
Scan Conversion: adjusts the conversion of source images. Opons include: Interlace and Progressive (recommended).
Film Mode: controls lm mode detecon and determines whether the original source of the input video was lm or video. Opons
include: Auto (default) and O.
IR Control: disables and enables the IR sensor on the tablet. Opons include: Normal (default; IR is enabled) and Lock (IR is disabled).
Keyboard Control: disables and enables the keypad on the right-hand side of the tablet. Opons include: Lock (keypad is disabled)
and Unlock (default; keypad is enabled).
Tiling: This feature only supported in Monitor Mode.
Heat Status: displays the current internal temperature of the Mondopad™ (+/-5°) and the cooling fan sengs. To change the fan set-
ngs, go to the Conguraon 1 menu and choose the Screen Saving opon.
Date and Time: lists the current date and me informaon of the Mondopad internal clock and allows the user to make date and
me adjustments. Opons include: Year, Month, Day, Hour, Minute, Daylight Saving Time.
Schedule: (Supported in Monitor Mode only) enables the user to create up to seven disnct on/o schedules for Mondopad. For
each schedule, the user oponally selects the me Mondopad should turn on and o, which input source is automacally acvated
(if desired) and what day(s) this occurs.
Monitor ID: set the idencaon number of the Mondopad™ tablet via the RS232C connecon. Each tablet must have a unique iden-
caon number when mulple tablets are connected. Range: 1-26. (Default; 1)
DDC/CI: enables and disables DDC/CI communicaon. Opons include: On (default) and O.
AdvancedOponReset: resets all Advanced Opon menu items to factory default sengs. Opons: Yes and No.