InFocus SP-CEIL-004 Fixed Height Ceiling Installation, Adjustable Height Ceiling Installation

(H) One (1) safety screw

(I)One rotation plate unit attached

(J)Two (2) tension screws

(K)Two (2) height adjustable screws

(L)Single wood stud (not included)

(M)Wall structure

(N)One (1) suspension adapter

(O) One (1) Litemount Plus® assembly (this contains (E), (G), and (I)

**Hardware item (F) is what secures the Digital Projector Mount to your ceiling, wall, tabletop, shelf or floor. Make sure you consult with your local hardware store staff for the type of hardware that works best for your installation environment.

Fixed Height Ceiling Installation

Complete the following steps to install the projector mount and projector on your ceiling. This installation works best with low ceilings (FIGURE 2).

Note: Look at the bottom of the swivel bracket (G) and locate the arrow. Make sure you install the projector mount with the arrow pointing toward your screen.

1.Secure the upper plate (E) to the ceiling (D) using the commercially available hardware (F) suitable for your environment. Be sure that the swivel bracket (G) arrow is pointing toward your screen.

2.Carefully raise the projector (C) with the mounting bracket (B) attached and insert it into the bottom of the swivel bracket (G) by its tabs.

3.Rotate the projector (C) with the mounting bracket (B) attached 180º so that the projector’s focus ring is pointing toward your screen.

4.Align the safety screw (H) on the swivel bracket (G) with the end of the arrow -shaped slot on the mounting bracket (B) and screw it through the opening to prevent further rotation. Hand-tighten the screw ( H).

5.Hand-tighten the remaining two clamp screws (J) to secure the mounting bracket ( B) to the swivel bracket (G).

Check all of the hardware for proper tightness and security. Do not over- tighten the screws.

Figure 2

Adjustable Height Ceiling Installation

Complete the following steps to install the projector mount and projector on your ceiling with the suspension adapter (N). This installation works best with high ceilings ( FIGURE 3).

Note: Look at the bottom of the swivel bracket (G) and locate the arrow. Make sure you install the projector mount with the arrow pointing toward your screen.

6.Use the Allen wrench to remove the upper plate (E) from the swivel bracket (G).

7.Use the Allen wrench to remove the two screws from the enclosed end of the of the suspension adapter ( N), and place it (N) into the slotted extension on the upper plate (E). Make sure that the two (2) outer holes on the suspension adapter (N) align with the holes on the slotted extension on the upper plate (E).

8.Screw the two screws removed in step 2 into the two (2) holes to secure the suspension adapter (N) to the upper plate (E).

9.Attach the swivel bracket (G) to the suspension adapter (N) and secure them with the two screws removed in step 1.

10.Secure the upper plate (E) to the ceiling (D) using the commercially available hardware (F) suitable for your environment. Be sure that the swivel bracket (G) arrow is pointing toward your screen.

11.Carefully raise the projector (C) with the mounting bracket (B) attached and insert it into the bottom of the swivel bracket (G) by its tabs.

12.Rotate the projector (C) with the mounting bracket (B) attached 180º so that the projector’s focus ring is pointing toward your screen.

13.Align the safety screw (H) on the swivel bracket (G) with the end of the arrow -shaped slot on the mounting bracket (B) and screw it through the opening to prevent further rotation. Hand-tighten the screw ( H).

14.Hand-tighten the remaining two clamp screws (J) to secure the mounting bracket ( B) to the swivel bracket (G).

Check all of the hardware for proper tightness and security. Do not over- tighten the screws.