Contents
Page
Declaration of Conformity
Trademarks
FCC Warning
Canada
Table of Contents
Important Operating Considerations for Safety
When the power cord or plug is damaged or frayed
Optional Accessories
Product specifications
Introduction
Online registration
Connector panel
12V External Trigger outputs
Positioning the projector
Horizontal Offset +/-15%
Ceiling Mount
Range of distance to the screen for a given screen size
Cable management
Connecting power
Connecting a computer source
HDMI 1.3 connection
VGA connection
Displaying an image
No start up screen? Get help on page
Adjusting the image
Connecting a video device
Video device connections
Composite video connection
S-video connection
What is Aspect Ratio?
Troubleshooting your setup
Table 1 Status indicator light behavior and meaning
Shutting down the projector
Screen Save Time
Problem No start up screen Only start up screen appears
Solution
Plug power cord into the projector, then press
power button
Problem
No computer image, just the words “Signal out of
range”
Only my laptop’s background appears, not the
Set your computer’s display resolution to the native
resolution of the projector Start Settings Control
Panel Display Settings tab
Move projector, adjust zoom and lens shift
Adjust Keystone in the Basic Picture menu
Adjust Sharpness in the Basic Picture menu
Image not square
Square image
Turn off Ceiling Mount in Setup menu
Turn off Rear Project in Setup menu
Adjust color, tint, brightness, contrast in the Basic
Image upside down
The video embedded in my PowerPoint
Lamp won’t turn on, Temperature light is on
Turn off the internal LCD display on your laptop
Embedded video plays correctly
“Replace lamp” message appears at startup, lamp
Lamp must be replaced see page
won’t turn on, Lamp light is turned on
Replace lamp Lamp door
Using the remote control
Troubleshooting the remote
Optimizing computer images
Using the keypad buttons
Presentation features
Optimizing video images
Customizing the projector
Using the menus
Basic Picture menu
Advanced Picture menu
Setup menu
Menu Transparency Allows you to change how much of the projected image
Status and Service menu
Help
WARNINGS
Maintenance
Cleaning the lens
Replacing the projection lamp
WARNINGS
Turn off and
unplug projector
Using the security lock
Appendix
SplitScreen Compatibility
HDMI
HDMI
RS-232 Commands
Communication Configuration
RS-232 Port Settings
Command Format
Limitations
Write Command Examples
Error Conditions
1 Timer
0 Disable 1 Enable
Resolution
Signal
1 Lamp won’t strike
Lamp Total On Time
Projector Info menu
1 Display
Reset Lamp Hours
1 Reset
Save User Presets
0 Disable 1 Enable
System State
INDEX
Numerics