InFocus SP8602, SP8600 manual Connector panel, 12V External Trigger outputs

Connector panel

The projector provides both computer and video connection options, including:

•VGA computer

•HDMI (2)

•S-video

•Composite video

•Component video (3)

•USB port

The projector also provides the following connectors:

•12V screen trigger outputs (3)

•IR Repeater input (for use with IR receivers that follow the Xantech connector specification T=Signal, R= GND, S=12VDC)

•RS-232 connector for serial control. Command control codes are in the Appendix and on our support website at www.infocus.com/support.

12V External Trigger outputs

The three 3.5mm mini-jack 12 volt, 0.25 amp DC outputs are screen/lens triggers:

•The “Lamp” trigger turns on when the lamp is lighted. If you connect your projection screen to this output using the cable that came with your screen, the screen will move down when the lamp is turned on and the screen will return to its storage position, when the lamp is turned off.

•The Letterbox “1” and “2” triggers are active when the projector is placed in letterbox mode and are utilized for variable masking and anamorphic lens control. (These triggers are off when SplitScreen is active.)

	Composite
Security lock	video	HDMI
	USB
		VGA	RS-232
	S-video
12V External		Component	IR
Trigger outputs		video	Repeater

Cable cover

6