Contents
Page
Trademarks
Declaration of Conformity
FCC Warning
Canada
Table of Contents
Important Operating Considerations for Safety
When the power cord or plug is damaged or frayed
Product specifications
Optional Accessories
Introduction
Online registration
12V External Trigger outputs
Connector panel
Horizontal Offset +/-15%
Positioning the projector
Range of distance to the screen for a given screen size
Ceiling Mount
Cable management
Connecting a computer source
Connecting power
HDMI 1.3 connection
VGA connection
No start up screen? Get help on page
Displaying an image
Adjusting the image
Video device connections
Connecting a video device
Composite video connection
S-video connection
What is Aspect Ratio?
Table 1 Status indicator light behavior and meaning
Troubleshooting your setup
Shutting down the projector
Screen Save Time
Solution
Problem No start up screen Only start up screen appears
Plug power cord into the projector, then press
power button
No computer image, just the words “Signal out of
Problem
range”
Only my laptop’s background appears, not the
resolution of the projector Start Settings Control
Set your computer’s display resolution to the native
Panel Display Settings tab
Move projector, adjust zoom and lens shift
Adjust Sharpness in the Basic Picture menu
Adjust Keystone in the Basic Picture menu
Image not square
Square image
Turn off Rear Project in Setup menu
Turn off Ceiling Mount in Setup menu
Adjust color, tint, brightness, contrast in the Basic
Image upside down
Lamp won’t turn on, Temperature light is on
The video embedded in my PowerPoint
Turn off the internal LCD display on your laptop
Embedded video plays correctly
Lamp must be replaced see page
“Replace lamp” message appears at startup, lamp
won’t turn on, Lamp light is turned on
Replace lamp Lamp door
Troubleshooting the remote
Using the remote control
Using the keypad buttons
Presentation features
Optimizing computer images
Customizing the projector
Optimizing video images
Using the menus
Basic Picture menu
Advanced Picture menu
Setup menu
Menu Transparency Allows you to change how much of the projected image
Help
Status and Service menu
Maintenance
Cleaning the lens
WARNINGS
WARNINGS
Replacing the projection lamp
Turn off and
unplug projector
Using the security lock
SplitScreen Compatibility
Appendix
HDMI
HDMI
Communication Configuration
RS-232 Commands
RS-232 Port Settings
Command Format
Write Command Examples
Error Conditions
Limitations
0 Disable 1 Enable
1 Timer
Resolution
Signal
1 Lamp won’t strike
Lamp Total On Time
1 Display
Projector Info menu
1 Reset
Reset Lamp Hours
Save User Presets
0 Disable 1 Enable
System State
Numerics
INDEX