InFocus SP8600, SP8602 manual Write Command Examples, Error Conditions, Limitations

Write Command Examples

Function	Commend	Response
Brightness	(BRT100)	Sets the brightness to
		100
Power	(PWR0)	Turns power off
Power	(PWR1)	Turns power on

Error Conditions

Not all commands are supported for all projectors. If an unsupported command is issued, the command will be ignored. If a command is received that is not understood, a ‘?’ character will be returned indicating the commandwas not understood.

Limitations

The projector cannot respond to commands coming in at a high-rate. Therefore, a delay must occur between commands to ensure that the command gets properly executed. To assure the projector can process a command, wait 3 seconds before entering the next command.

The Step column refers to increasing or decreasing the menu bar position since the On-screen Display is not an exact match of values. For example, Step 2 changes the data by 2 through the CLI (Command Line Interface). The menu bar is up (or down) by 1.

	Com-
Function	mands	RW	Min	Max	Default	Step
AC Power On	APO	RW	0	1	0	1
0: Disable; 1: Enable
Always-On	SPS	RW	0	2	0	1
Functions
Aspect Ratio	ARZ	RW	0	6	0	1
0: Auto
1: Native
2: 4:3
3: 16:9
4: Letterbox
5: Panorama
6: 16:10
Aspect Ratio of	QAR	R			source specific
Current Source
? = Query
Auto Image	AIM	W	n/a	1	1	1
1: Enable
Auto Off Time	AOT	RW	0	6	6	1
Auto Source	ASC	RW	0	1	1	1
0: Disable; 1: Enable
Blank Screen	BLK	RW	0	1	0	1
0: Off; 1: On

37