U630 USER MANUAL PAGE 19
2.2.5 Creating a data session
NOTE: PLEASE ENSURE YOU HAVE AN ACTIVE UMTS DATA ACCOUNT WITH A UMTS SERVICE PROVIDER, THE SIM MUST BE ENABLED FOR UMTS AND SMS AS REQUIRED.
1.
that MobiLink 2 places on your desktop during the installation process.
2.The MobiLink 2 software will then initialize your UMTS Merlin. See Figure 24.
FIGURE 24
3.If your SIM is locked you will be prompted for a SIM PIN code/number (originally provided by your Service Provider. You may change this – Menu > Configuration > Mobile tab >) Enter the SIM code and press OK. See Figure 25.
NOTE: IF YOU ARE NOT PROMPTED FOR A SIM PIN CODE CONTINUE TO STEP 4.
FIGURE 25
NOTE: SEE TROUBLESHOOTING SECTION FOR UNLOCKING YOUR DATA CARD IF IT IS SIM LOCKED.
| Revision 1 |
|
|
