Adjusting the image
If necessary, adjust the height of the projector by pressing the release button to extend the foot.
If necessary, rotate the leveling foot located at the rear of the projector.
Avoid placing your hands near the hot exhaust vent in front of the projector.
Position the projector the desired distance from the screen at a 90 degree angle to the screen.
See page 45 for a table listing screen sizes and distances.
Adjust the zoom or focus.
If the image is not square, adjust the keystone using the buttons on the key- pad.
Press the top Keystone button to reduce the upper part of the image, and press the bottom Keystone button to reduce the lower part.
Adjust the Contrast or Brightness in the Picture menu.
See page 36 for help with these menu adjustments.
adjust height |
|
elevator |
|
foot | release button |
adjust distance |
|
adjust zoom or focus
focus (thin ring)
adjust keystone
adjust Picture menu
rotate leveling foot
zoom (thick ring)
13
