InFocus X2 manual Connector Panel, Volt DC output, Wireless Projection

Connector Panel

The projector provides both computer and video connection options, including:

•M1 for computer and video

•S-video

•Composite RCA audio/video

The projector also provides the following connectors:

•Monitor out

•Audio out

•12 volt DC output (see below)

12 volt DC output

The 3.5mm mini-jack trigger provides a 12 volt DC output. It provides a constant output while the projector is on. It has numerous uses. For exam- ple, if you connect your projection screen to the 12 volt DC output with the cable that came with your screen, when you turn on the projector the screen will move down; when you turn the projector off, the screen will return to the storage position. To use the 12 volt DC output, you must first remove the safety plug and turn Screen Trigger on in the System menu (see

page 38).

Wireless Projection

You can use the projector’s M1 connector along with the InFocus LiteShow wireless adapter and software for cable-free digital projection. Contact an authorized InFocus dealer or visit the website listed on the back inside cover of this User’s Guide for more information.

RCA audio/visual

12 volt	M1computer monitor			audio
					S-video
DC output				out
+12v		ground
				12 volt DC output
			3.5mm plug

to, for example, screen relay (see screen manufacturer for details)

6