Appendices
1
Warning: To avoid
burns, allow the projec- tor to cool for at least
60 minutes before you replace the lamp!
2
3
Warning: To reduce the risk of personal injury, do not drop the lamp module or touch the lamp bulb. The bulb may shatter and cause injury if it is dropped.
4 |
Lamp Replacing Procedure:
1.Switch off the power to the projector by pressing the Power/ Standby .
2.Allow the projector to cool down at least 60 minutes.
3.Disconnect the power cord.
4.Use a screwdriver to remove the screw from the cover.
5.Push up and remove the cover.
6.Remove the 2 screws from the lamp module and pull up the lamp bar.
7.Pull out the lamp module by force.
To replace the lamp module, reverse the previous steps.
English ... 34
