OPERATOR’S MANUAL | 1875CXXXXXX |
INCLUDING: SERVICE KITS, TROUBLESHOOTING, PARTS LIST,
DISASSEMBLY & REASSEMBLY.
1875CXXXXXXLOWER PUMP ENDAlso covers K1875CXXXXXX service kits
RELEASED:
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.
The original language of this manual is English.
GENERAL DESCRIPTION |
|
WARNING DO NOT EXCEED MAXIMUM OPERATING PRES- |
|
SURE AS INDICATED ON PUMP MODEL PLATE. |
|
WARNING REFER TO GENERAL INFORMATION SHEET FOR |
|
ADDITIONAL SAFETY PRECAUTIONS AND IMPORTANT IN- |
|
FORMATION. |
|
This manual covers the lower pump section. It is one of four |
|
documents which support an ARO pump. Replacement copies |
|
of these forms are available upon request. |
|
Pump Model Operator’s Manual. |
|
General Information for Air / Hydraulically Operated Piston |
|
Pumps. |
|
Lower Pump End Operator’s Manual. |
|
Air / Hydraulic Motor Operator’s Manual. |
|
MAINTENANCE |
|
The air / hydraulic motor is completely separate from the lower |
|
pump end. This helps to keep the motor from being contaminated |
|
by the material being pumped. Periodically, flush entire pump |
|
system with a solvent that is compatible with the material being |
|
pumped. |
|
Keep solvent cup filled with this compatible solvent. This will |
|
keep the material from drying on the plunger, which would drag |
|
through the packings, ruin them and eventually scour the plunger. |
|
Provide a clean work surface to protect sensitive internal moving |
|
parts from contamination from dirt and foreign matter during dis- |
|
assembly and reassembly. |
|
Before reassembling, lubricate parts as required. When assembling |
|
“O” rings, or parts adjacent to “O” rings, exercise care to prevent | Figure 1 |
damage to “O” rings and “O” ring groove surface. |
INGERSOLL RAND COMPANY LTD
209 NORTH MAIN STREET – BRYAN, OHIO 43506
(800)