Ingersoll-Rand 4578217 manual Servicing The Tool, Lubrication, Specifications, Dwg. TPD905-2

SERVICING THE TOOL

Lubrication

Ingersoll--Rand No. 10	Ingersoll--Rand No. 68
Ingersoll--Rand No. 50

Always use an air line lubricator with these tools.

We recommend the following Filter--Regulator--Lubricator Unit (FRL):

Inside USA use FRL unit # C11--03--G00 Outside USA use FRL unit # C26--C4--A29

After each two hours of operation, if an air line lubricator is not used, inject 1/2 to 1 cc of Ingersoll--Rand No. 10 Oil into the Air Inlet.

Main Line(s) Inner Ø			Branch Line(s) Inner Ø
to be 3X Size of			to be 2X Size of
Air Tool’s Inlet Ø			Air Tool’s Inlet Ø
To Air
System
To Air
Tool
Emergency	L	R	F
Shut--Off
Valve
Lubricator	Regulator		Filter
	FRL

Drain Regularly Compressor

							(Dwg. TPD905-2)
			SPECIFICATIONS
					H Sound Level
Model	Speed		Collet				z Vibration Level
					dB(A)
	rpm	inches		mm	Pressure	Power	m/s2
335SC4	35,000		1/4I	6	82.1	--------	3.7
330SC4	30,000		1/4I	6	82.8	--------	2.1
325SC4	25,000		1/4I	6	81.2	--------	1.8
325XC4	25,000		1/4I	6	82.2	--------	2.4
(3I Extension)
330XC4	30,000		1/4I	6	82.6	--------	1.9
(3I Extension)

HTested in accordance with PNEUROP PN8NTC1.2 z Tested in accordance with ISO8662

3