Ingersoll-Rand 67165-X Solenoid Kit Installation, 2” & 3” METALLIC DIAPHRAGM PUMPS, Parts List

67277-( ) SOLENOID KIT INSTALLATION

2” & 3” METALLIC DIAPHRAGM PUMPS

Refer to figure 3.	2. Attach 67277-( ) solenoid kit assembly to (101) center body, using
1. Remove (134) screws and (133) washers, and remove (135) valve	(134) screws and (133) washers. NOTE: Torque screws to 40 - 50 in.
block and components from (101) center body.	lbs (4.5 - 5.6 Nm).

			.Torque to 40 - 50 in. lbs (4.5 - 5.6 Nm).
			Z See page 4 for coil options.
			~ Included in 67277-( ) Kit.
			101
			~ 29670 Ball
			133
67277-( )
			. 134
			135
			43
					Figure 3
67277-( ) PARTS LIST				119380 Coil Nut
				116218-( ) Coil (see table)
114104		(1.5 mm x 14.5 mm o.d.)		114102 Valve System
Y325-126				114103	(1.5 mm x 5.5 mm o.d.)
		(3/32" x 1-9/16" o.d.)		Y147-16-C Retaining Ring (1.804" o.d.)
			92011 Piston
				94728 Solenoid Plug
Y186-51		(3/16" x 1-3/8" o.d.)		92005 Spool
		94032-1 Valve Block
				92876 Spacer (4)
Y325-214			(1/8" x 1-1/4" o.d.)
				Y325-126	(3/32" x 1-9/16" o.d.)
NOT SHOWN				92877 Washer (5)
CHW Connector
Y16-203 Ball (2) (3/32" dia, press flush w/94032-1)
96728647 Cap Screw (2) (M3 - .5 x 18)
				94027 Spacer
MODEL	VOLTAGE		COIL	94034 Inlet Plug
67277-1		24 VDC	116218-39
67277-2	120 VAC		116218-33
67277-3	No Coil Z				Figure 4
67165-X					Page 3 of 4