PD05P-XXX-XXX (en) Page 5 of 8
19
62

15
22
22
12
21
12
21
19
61 (models PD05P-AAS-XXX)
26

61 (models PD05P-ASS-XXX)
43
26

60 (models PD05P-ASS-XXX)
63
60 (models PD05P-AAS-XXX)
1
14

25
7 6
PARTS LIST / PD05P-XXX-XXX FLUID SECTION

FOR THE AIR MO-

TOR SECTION, SEE

PAGES 6 & 7.

COLOR CODE
Diaphragm Ball
Material Color Color
Nitrile Black Red (y)
Santoprene Tan Tan
PTFE White White
Viton Yellow (y) Yellow (y)
(
y) Dot

Figure 3

5
7
2
3
8
6
4
1

Torque Sequence

PTFE

) TORQUE REQUIREMENTS (

NOTE: DO NOT OVERTIGHTEN FASTENERS.
(14) Bolt, 95 - 105 in. lbs (10.7 - 11.9 Nm).
(26) Bolt, 50 - 60 in. lbs (5.6 - 6.8 Nm), / alternately and evenly, then
re-torque after initial run-in.
(62) Nut, 50 - 60 in. lbs (5.6 - 6.8 Nm), / alternately and evenly, then
re-torque after initial run-in.

LUBRICATION / SEALANTS

c
Apply Key-Lube to all “O” rings, “U” cups and mating parts.
d
Apply pipe sealant to threads.
e
Apply anti-seize compound to threads and bolt and nut  ange
heads which contact pump case when using stainless steel
fasteners.
f
Apply Loctite® 271™ to threads.
g
Used on models PD05P-AAS-XXX only.
PTFE
- 7
uid side (white)
Santoprene - 8
air side (tan)
View for PD05P-AXS-XXT (PTFE dia-
phragm) con guration only.