Ingersoll-Rand PE10X-X-X, PD10X-X-X manual Torque Requirements, Lubrication / Sealants, For The

PARTS LIST / PX10X-X-X FLUID SECTION

COLOR CODE

	DIAPHRAGM	BALL
MATERIAL	COLOR	COLOR
Hytrel	Cream	Cream
Nitrile	Black	Red (S)
Santoprene	Tan	Tan
Santoprene	Green	N / A
(Backup)
PTFE	White	White
Viton	Yellow (-)	Yellow (S)
	(-) Dash	(S) Dot

63 - k

31

58

910

76

24 Torque Sequence

61

.TORQUE REQUIREMENTS ,

NOTE: DO NOT OVERTIGHTEN FASTENERS.

ALL FASTENERS ARE METRIC.

(14)screw, tighten to 25 - 30 ft lbs (33.9 - 40.7 Nm).

(26)screws, 20 - 25 ft lbs (27.1 - 33.9 Nm).

(29)nuts, 15 - 20 ft lbs (20.3 - 27.1 Nm).

(131)screws, 12 - 17 ft lbs (16.3 - 23.0 Nm).

LUBRICATION / SEALANTS

kApply Lubriplate FML-2 grease to all “O” rings, “U” Cups &

mating parts.

xApply LoctiteR 242 to threads at assembly. - Apply PTFE tape to threads at assembly. ~ Apply Loctite 271 to threads at assembly.

U Apply anti-seize compound to threads and bolt and nut flange heads which contact pump case when using stainless steel fasteners.

s Not used with PX10X-XXX-AXX, -CXX and -GXX.

Z Lubriplate FML-2 is a white food grade petroleum grease.

		26 , U	FOR THE
			AIR MOTOR SECTION
			SEE PAGES 6 & 7
68	70 k 76 -	144 k	131 , x
A
		70 k 29 ,	195 69	7	9

B

A

22

19 s

21

33 s

27 U

				175 k	43					15
			74 -		144 k
						175 k	B
						27 U 1 k 180 k		5		29 ,
						63 - k				22
								6	14 , ~
						26 , U				19 s
							Figure 2			21
		MATERIAL CODE				60
[A]	= Aluminum		[K]	= PVDF (KynarR)
[B]	= Nitrile		[MSP]= Medical Grade Santoprene							33 s
[C]	= Carbon Steel		[P]	= Polypropylene
[CI]	= Cast Iron		[SH]	= Hard Stainless Steel
[Co]	= Copper		[SP]	= Santoprene
[E]	= E.P.R.		[SS]	= Stainless Steel
[H]	= Hytrel		[T]	= PTFE
[Ha]	= Hastelloy-C		[V]	= Viton

View of two piece PTFE diaphragm

Santoprene 8

PTFE 7

AUXILIARY VIEW A-A

(models PX10R-XXX-XXX)

k180

28

AUXILIARY VIEW B-B

(models PX10R-XXX-XXX)

180 k

195

PD10X-X-X Page 5 of 8