Congratulations! You’re the new owner of an Allworx 9102 or 9112 VoIP phone. This phone will make it easy for you to place and receive calls when using the Allworx 10x system.

Getting Started

What is in the box?

Check out the contents of the box your phone came in. You should have:

Allworx 9102 or 9112 phone (including base)

Power supply

Handset with cord

This guide

You will also need:

Ethernet cable to connect the phone to the network

Connecting the Phone

We’ve taken all the challenge out of connecting your phone properly. Follow these steps to connect:

1.Plug one end of the Ethernet cable into the Network jack on the back of the phone. Plug the other end into your Ethernet jack on the wall. WARNING: DO NOT CONNECT TO AN ANALOG PHONE LINE.

2.The phone contains an Ethernet switch. A computer can be connected to the network thru the phones PC port.

3.If you’re using Power over Ethernet (PoE), the power to the phone was supplied when you connected the Ethernet cable. Skip this step.

If you’re not using PoE, connect the power cable into the phone, then plug the other end into an outlet. It’s a good idea to use a surge suppressor.

4.After applying power, the phone will initialize itself. You can watch its progress on the phone’s screen and a normal sequence would include:

a.Allworx Logo appears.

b.Starting network.

c.Loading configuration files.

d.Station Init complete.

e.After successful startup, the phone will display date, time, your user name etc.

f.If the phone does not follow this sequence or displays an error, contact your system administrator.

635 Crosskeys Office Park • Fairport, NY 14450 • Toll Free 1-866-ALLWORX585-421-3850 • www.allworx.com

© 2004 InSciTek Microsystems, Inc. All rights reserved. Allworx is a registered trademark of InSciTek Microsystems. All other names may be trademarks or registered trademarks of their respective owners.

1

Page 5
Image 5
InSciTek Microsystems 9102, 9112 manual Getting Started, What is in the box?, Connecting the Phone