![PROGRAM PLAY](/images/new-backgrounds/13141/1314113x1.webp)
PROGRAM PLAY
This allows selected tracks on the disc to be played in any desired order.
To set the program play
!CD
a.In the stop mode, press the PROGRAM button and
b.Press F.SKIP or B.SKIP button to select the track number.
c. When desired track is displayed, press PROGRAM but- ton to register. Then PGM and
d.Repeat steps (b) and (c) (up to 60 tracks). After regis- tering all tracks, display shows the first registered track.
e.Registered track can be checked by pressing PRO- GRAM button.
!MP3
a.In the stop mode, press the PROGRAM button and
b.Press ALBUM UP and ALBUM DOWN button to select the album number.
c. When desired album number is displayed,press F.SKIP or B.SKIP button to select track number.
d.Press PROGRAM button to store,
e.Registered tracks can be checked by pressing PROGRAM button.
To complete programming and start play CD | MP3 |
Press PLAY/PAUSE button, the PGM stops flashing and play will begin.
To clear programming
!Open the door, or
!Power off, or
!In program mode, press STOP button.
CDMP3
INTRO PLAY
1. Press MODE button three times (for CD) / four times (for MP3), then INT is displayed.
2. Press the PLAY/PAUSE button. Starts INTRO play from track number 01.
3.The first 10 seconds of each track of the disc will be played.
4.Press the PLAY/PAUSE button again to return to normal
playback.
RANDOM PLAY
Enables all the tracks on a disc to be played in a Random (Shuffle) sequence.
1. Press MODE button four times CDMP3 (for CD) / five times (for MP3),
and RDM is displayed.
2.Press PLAY/PAUSE button to start RANDOM play.
3.Select RANDOM mode during play, RDM play start.
!After finished playing the cur- rent track or if F. SKIP or B. SKIP button is pressed, RAN- DOM play starts.
12 | 13 |