![](/images/new-backgrounds/1133543/13354327x1.webp)
Tuning in
To skip unwanted channel
TV/AV
|
|
| STEREO | |
1 | 2 | 3 | Direct channel | |
select buttons | ||||
|
|
| ||
4 | 5 | 6 | CCD | |
| ||||
|
|
| DSP | |
7 | 8 | 9 | DSP | |
| ||||
|
|
| MUTE | |
0 |
|
|
| |
SCAN |
|
| P |
After presetting the channels, you can skip unwanted channels so that only the channels you want to watch are selected with Channel up/down buttons.
1 Select the unwanted channel with channel select buttons.
O r p r e s s M E N U b u t t o n |
| Search |
repeatedly to display Search |
| |
menu, press CH- or CH+ to | Signal Input | Air |
select Channel menu item, | Channel | 28 |
press V- or V+ to select the | Skip | On |
unwanted channel. | Auto Search | Press V+ |
Press CH- or CH+ to select Skip, | Fine tune | 0 |
|
| |
2 press V- or V+ to select Skip ON. |
|
|
Thus, after exiting the menu, the channel will then be skipped when you select programs with the Channel up/down button.
If you want to skip other unwanted channels, repeat steps above to change the channel number.
Note: you can select the skipped channel by pressing the direct channel select buttons.
| CH+ |
|
|
V- | MENU | V+ | Menu control buttons |
|
|
| |
| CH- |
|
|
To restore a skipped channel
Use direct channel select buttons
Manual Fine Tuning
*To exit the menu, press DSP button or repeatedly press MENU button.
Fine tuning is not necessary under normal conditions. However, in area of inferior broadcast conditions where adjustment is necessary for a better picture and sound, use Fine tuning.
1 Select the channel you want to
2 | Enter into Search menu, press |
| Search | |
Signal Input | Air | |||
CH- or CH+ to select Fine Tune, | ||||
| then press and hold V- or V+, the | Channel | 28 | |
| Skip | Off | ||
| channel begins fine tuning until | |||
| Auto Search | Press V+ | ||
| the best possible picture and | Fine tune | ||
| sound is achieved. |
|
|
(Press V- to
Auto Fine Tuning (AFT)
If picture and sound's effect of the channel is instead poor by making use of Fine Tune, you can correct them by making use of AFT.
Search
1
2
Enter into Search menu, press CH- to select AFT.
Press V- or V+ to select AFT On.
Channel | 28 |
Skip | Off |
Auto Search | Press V+ |
Fine tune | |
AFT | On |
13