Insignia IS-TV040922 Channel selection, Use Direct Channel Select buttons, To scan programs

Channel selection

TV/AV

		STEREO
1	2	Direct channel
		3
		select buttons
		CCD
4	5	6

DSP DSP

7 8 9

MUTE

0

SCAN P

You can select your desired TV program by one of the following methods.

Use Direct Channel Select buttons

?AIR Mode Direct Channel Selection

When the Signal Input menu option in Search menu is in the Air position, all channels can be selected by directly entering the channel number.

?CATV Mode Direct Channel Selection

When the Signal Input menu option in Search menu is in the CATV position, channels can be selected as follows:

Method 1:

Directly enter the channel number and wait for some time.

Method 2:

1-9: Press “0” twice, then 1-9 as needed. For example, to select channel 2, press “002”.

10-99: Press “0”, then the remaining 2 digits. For example, to select channel 12, press “012”.

100-125: Press the 3 digits in order. For example, to select channel 120, press “120”.

CH+CH+

V- MENU V+

CH-CH-

Use Channel up/down buttons

Press CH+ button, the channel number increases; Press CH- button, the channel number decreases.

Use previous channel button

Press button to switch between the current channel and the previous one.

Notes:

Use DSP button to know the current channel number

Press DSP button to display the	12 ST SAP
current TV state. If in TV program
viewing, then it will display the
current channel number, sound
mode and remaining sleep time (if
set).	Sleep 22

To scan programs

Press SCAN button, the TV set will scan the channels from current channel to higher channels one by one, every program will be displayed for about one second and then go on scanning.

Press SCAN button again, the screen will settle at the current scanned program.

14