Insignia NS-15LCD manual Using your TV, Basic operation, To watch TV

NS-15LCD 15-inch TV - combined.fm Page 14 Wednesday, March 29, 2006 5:16 PM

Note

NS-15LCD 15" LCD TV

Batteries should never be thrown away or incinerated. Always dispose of batteries in accordance with your local regulations concerning chemical wastes.

Using your TV

Basic operation

To watch TV:

1Plug the AC power adapter into a standard AC power outlet.

2Plug the AC power adapter cord into the power connector on the TV.

3Press POWER to turn on the TV. The power indicator light on the TV turns from red to green.

4Press CH or to change the channel. - OR -

Press the number buttons to enter the channel number directly.

5Press VOL or to adjust the volume to the level you want.

6Press MUTE to instantly mute the sound. Press it again to restore the previous volume level.

7Press DISPLAY to show the current channel number on the screen.

8Press AUDIO on the remote to access the sound mode settings, then press AUDIO repeatedly to select the setting you want from:

•Standard

•Memory

•News

•Music

These settings are also available in the Sound submenu.

9Press PICTURE on the remote to access the picture mode settings, then press PICTURE repeatedly to select the setting you want from:

•Standard

•Memory

•Soft

•Dynamic

These settings are also available in the Picture submenu.

10 Press RECALL to go to the previous channel.

11 Press POWER again to turn off the TV.

Note

In TV, AV, S-Video, or Component mode, the TV goes into Standby mode after five minutes if there is no signal and no input. In VGA mode, the TV goes into Standby mode in 45 seconds.

14www.insignia-products.com