
NS-15LCD 15" LCD TV
Caution
Note
For your safety and to avoid damage to the TV, unplug the antenna cable from the ANT jack before moving it.
•We recommend 75 ohm coaxial cable to eliminate interference and double image due to the unmatched input impedance of the antenna.
•The antenna/cable and power line should not be bundled together.
Connecting to a wall jack
Connect the TV to the
Connecting to a wired antenna cable
Note
Before plugging the antenna into the ANT jack on the TV, make sure that the pin is not bent. If it is bent, straighten the pin, then plug the cable into the ANT jack of the TV.
From outside antenna |
CATV connection
Using a cable or satellite box
If your cable service supplies you with a converter box, or if you use a satellite system, you can connect it to your TV with a 75 ohm RF cable (commercially available).
Channel selection must be made with the converter box or satellite box, so channels cannot be changed using the remote control of this TV.