Insignia
Changing the volume
You can change the volume using the TV’s side panel or the remote control.
To change the volume:
1Press VOL+ or
2Press MUTE to mute the sound, and press it again to restore sound.
Programming channels into memory
To automatically program channels into memory:
1Press TV MENU on the remote control, then
press 
to highlight the INSTALL icon. The INSTALL menu opens.
TV mode
Changing the video source
Your TV supports multiple video sources.
To select the video source:
•Press the INPUT button to select from the following signal modes, then press ENTER to confirm the selection:
•TV
•AV1
•AV2
•
•DVD
•YPbPr
•PC
Changing channels
To change channels:
•Press CH+/- or CH
/ 
.
To enter a channel number directly:
•Press the number buttons on the remote control.
To switch between two channels:
1Press RECALL to change from the currently tuned channel to the previous channel.
2Press RECALL again to change back to the originally tuned channel.
INSTALL
LANGUAGE | ENGLISH |
TUNER MODE | ANTENNA |
AUTO PROGRAM |
|
CHANNEL EDIT |
|
FACTORY RESET |
|
MOVE 
SELECT ENTER RETURN 
EXIT
Other modes
INSTALL
LANGUAGEENGLISH
FACTORY RESET
MOVE 
SELECT ENTER RETURN 
EXIT
2Press 
to enter the INSTALL menu.
3Press 
to select AUTO PROGRAM, then
press 
to start the auto search. The TV searches and memorizes all channels available in your area.
4To stop the auto search, press ENTER or
TV MENU.
When auto search is finished, the INSTALL menu opens and the channel changes to the first channel in the memorized channel list.
To manually program channels into memory:
1Press TV MENU on the remote control, then
press 
to highlight the INSTALL icon. The INSTALL menu opens.
2Press 
to enter the INSTALL menu.
10 |