Insignia
Specifications
| Panel | 20" WIDE TFT LCD | |
|
|
| |
| Resolution | 1366 X 768 | |
|
|
| |
LCD | Viewing angle | 80°/80°/80°/60° | |
| Contrast ratio | 600:1 | |
|
|
| |
| Brightness (cd/m2) | 350 | |
| With stand | 25.3 × 16.9 × 8.3 inches | |
Dimension |
| (645 × 430 × 210 mm) | |
|
| ||
Without stand | 25.3 × 13.9 × 4.4 inches | ||
| |||
|
| (645 × 345 × 111.5 mm) | |
|
|
| |
Weight |
| 12kg (26.5lbs) | |
|
|
| |
| TV standard | NTSC | |
|
|
| |
| Tuning system | Electronic tuning system | |
TV |
|
| |
Frequency range | VHF/UHF | ||
|
|
| |
| Stereo | NICAM | |
|
|
| |
| CATV | 125 channels | |
|
|
| |
| Input | ||
Power |
|
| |
Consumption (TV only) | ≤62 W (typ) | ||
|
|
| |
| Consumption (TV with DVD player) | ≤68 W (typ) | |
|
|
| |
Sound | Output | 3 W + 3 W | |
|
|
| |
| A/V in | Video, | |
|
|
| |
Terminals | Component | Y, Pb (Cb), Pr (Cr) | |
|
| ||
PC in | |||
| |||
|
|
| |
| Antenna in | ||
|
|
| |
| Laser | Wavelength 650 nm | |
|
|
| |
| Video system | NTSC | |
|
|
| |
| Frequency response | 20 Hz ~ 20 KHz ± 2.5 dB | |
DVD player |
|
| |
Signal/noise ratio | ≥80 dB | ||
|
|
| |
| Audio distortion + noise | ≤ | |
|
|
| |
| Channel separation | ≥80 dB ( 1 KHz) | |
|
|
| |
| Dynamic range | ≥80 dB ( 1 KHz) | |
|
|
|
Legal Notices
FCC Part 15
This equipment has been tested and found to comply with the limit for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does not cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encourage to try to correct the interference by one or more of the following measures.
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio or TV technician for help.
•Only a shielded interface cable should be used.
Macrovision statement
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
23 |