Connecting to video sources
Insignia
Connecting to a standard video source
Connecting to an antenna or cable/satellite receiver
1
1
2
3
4
RF | VGA | AUDIO |
INPUT | INPUT | VGA INPUT OUTPUT |
2
3
To connect an external antenna or cable/ satellite receiver:
1Remove the port cover on the back of the TV (1).
2Connect the antenna terminal from an antenna or cable/satellite receiver (3) to the antenna input jack on the TV (2).
3Press the INPUT button and the 
buttons to set the TV’s signal input to TV.
5
Your TV supports multiple video source inputs. For temporary or
6
7
INPUT 1
R |
| |
AUDIO |
| |
VIDEO | L |
|
INPUT 3 |
| VIDEO |
CR / PR |
|
|
|
| INPUT 2 |
|
| L |
CB / PB | L |
|
AUDIO | R | |
| ||
|
| AUDIO |
YR
8
To connect a standard video source to AV1 jacks:
1Connect an RCA video cable (2) to a standard video source (1) and the back VIDEO jack (5).
2Connect RCA audio cables (4) to the source’s audio output jacks and the upper AUDIO L and R jacks on the back panel (5).
3Press the INPUT button and the 
buttons to set the TV’s signal input to AV1.
To connect a standard video source to AV2 jacks:
1Connect an RCA video cable (6) to a standard video source (1) and the side VIDEO jack (8).
2Connect RCA audio cables (7) to the source’s audio output jacks and the side AUDIO L and R jacks (8).
3Press the INPUT button and the 
buttons to set the TV’s signal input to AV2.
8 |