Insignia NS-20CLTV 20" Combo DVD/LCD TV

To connect a standard S-Video source to AV1 jacks:

1Connect an S-Video cable (3) to a standard video source (1) and the back S-VIDEO jack (5).

2Connect RCA audio cables (4) to the source’s audio output jacks and the back AUDIO L and R jacks (5).

3Press the INPUT button and the buttons to set the TV’s signal input to S-Video.

Connecting to a component video source

1

2

4

INPUT 1

S-VIDEO R

AUDIO

VIDEO L

INPUT 3

CR / PR

CB / PB

L

AUDIO

YR

3

To connect a progressive-scan or HDTV video source to Y/Pb/Pr jacks:

Connecting to a computer

1

RF

VGA

AUDIO

INPUT

INPUT

VGA INPUT OUTPUT

2 3

4

To connect a computer video source to the VGA jacks:

1Remove the port cover on the back of the TV (1).

2Connect a VGA cable (2) from the computer (4) to the VGA INPUT port on the TV.

3Connect a male-to-male audio cable (3) from the computer (4) to the AUDIO VGA INPUT port on the TV.

4Press the INPUT button and the buttons to set the TV’s signal input to PC.

Note

The best resolution for displaying computer video on this TV is 1280 × 768.

Using your TV

1Connect component video cables (2) to a progressive-scan or HDTV video source (1) and the back Y/Pb/Pr jacks (3).

2Connect RCA audio cables (4) to the source’s audio output jacks and the lower AUDIO L and R jacks on the back panel (3).

3Press the INPUT button and the buttons to set the TV’s signal input to YPbPr.

Turning the power on and off

To turn the power on and off:

1Press the POWER button on the side panel of the TV or on the remote control. The POWER/STANDBY indicator turns green.

2To turn off the TV, press the POWER button again. The screen image disappears and the POWER/STANDBY indicator turns red.

Note

A small amount of electric power is consumed even when the power is turned off.

www.insignia-products.com

9