![](/images/backgrounds/182289/182289-6819x1.png)
26"/32" LCD, 1080p
To connect a cable or satellite box: | Connecting an HDMI device |
1Connect the incoming cable from the cable wall
jack to the | Note |
HDMI
Composite
Component
2Depending on the jacks available on the cable or satellite TV box, connect a cable (not provided) from the outgoing jacks on the cable or satellite TV box to the corresponding jacks on the back of your TV. The connection can be to an HDMI jack, the Y/Pb/Pr (component video) jacks,
3If you use the Y/Pb/Pr (component video) jacks,
Note
If the cable or satellite TV box does not have an HDMI, component, or composite jack, connect the cable or satellite TV box to the ANT/CABLE IN jack on the back of your TV. For more information, see “Connecting an antenna or cable TV without a cable box” on page 14.
If your device has an HDMI connection, we recommend that you use the HDMI connection to get the best quality possible.
To connect an HDMI device:1Make sure that your TV’s power cord is unplugged and the HDMI device is turned off.
2Connect an HDMI cable (not provided) to the HDMI 1, HDMI 2, or HDMI 3 jack on the side of your TV and to the HDMI OUT jack on the HDMI device.
HDMI device
Side of TV
To play from an HDMI device:1Turn on your TV, then press INPUT to open the Input Source list.
2Press or
to select HDMI 1, HDMI 2, or HDMI 3, then press OK/ENTER.
Note
You can also press HDMI repeatedly to select the HDMI device.
3Turn on the HDMI device, then set it to the output mode. See the documentation that came with the device for more information.
www.insigniaproducts.com | 15 |