NS-26L450A11/NS-32L450A11 26"/32" LCD, 1080p

ProblemSolutionProgrammed remote control functions
Problem

VGA picture is not stable or synchronized

Solution

• Make sure that you have selected the

correct VGA mode on your computer.

The LED does not blink when you press a button

The LED blinks when you press a button but the device does not respond.

The LED blinks one long blink while in SET mode

• Try pressing different buttons.

• The batteries may already be drained.

Replace the batteries.

• Make sure the remote is aimed at your

device and is not more than 40 feet

(12.2 m) away.

• An entry error has occurred (for example,

wrong button was pressed). Try entering

the sequence again.

After images appear

Picture has a few bright or dark spots

• Do not display a still image, such as a logo,

game, or computer image, for an

extended period of time. This can cause a

permanent after-image to be burned into

the screen. This type of damage is not

covered by your warranty.

• A few bright or dark dots on an LCD screen

is normal. It does not affect the operation

of this TV.

When programming the remote control, the remote does not control devices or commands are not working correctly

No volume on a device

Channels do not change correctly when directly

• Try all listed codes for the device.

• Make sure the device operates with an

infrared remote control.

• Refer to “Changing the volume lock” on

page 11 and make sure the volume is not

locked to a different mode already.

• If the original remote control required you

Audio

Good picture but no sound

No output from one of the speakers

Increase the volume.

Make sure that the sound is not muted.

Make sure that the correct audio mode is selected. See “Adjusting sound settings” on page 25.

Adjust the balance in the Audio menu. See “Adjusting sound settings” on page 25.

entering numbers to change channels

to press ENTER to change channels, press

OK/ENTER on your TV remote control

after entering the channel number.

Other

Buttons on the front of the TV do not work

• Make sure that the Button Lock option is

Picture

No picture

• Make sure that the Audio Only option is

set to Off. See “Playing TV audio only” on

page 26.

• Make sure that the video cables are

connected securely to the back of your TV.

See “Making connections” on page 14.

• Adjust the contrast and brightness. See

“Adjusting the TV picture” on page 23.

• Make sure that the correct video mode is

selected. See “Selecting the video input

source” on page 21.

• Make sure that the incoming signal is

compatible.

• Make sure the antenna is connected

correctly. See “Connecting an antenna or

cable TV without a cable box” on page 14.

• Check the closed caption settings. Some

TEXT modes can block the screen. See

“Selecting the analog closed captioning

mode” on page 34.

INlink does not work

set to Off. See “Locking control buttons”

on page 30.

• Unplug the power cord, wait a few

seconds, then plug the cord back in and

turn on your TV.

• Make sure that the device you want to

control is HDMI CEC-compatible.

• Make sure that the HDMI device’s power

cord is connected correctly.

• Make sure that the INlink Control option is

set to On in the INlink menu. See “Using

INlink” on page 38.

• Scan for INlink devices again. See “Using

INlink” on page 38.

• Connect an INlink device using an

HDMI 1.3 cable.

• If it the HDMI cable is disconnected then

reconnected or if the power is turned off

scan for INlink devices again. See “Using

INlink” on page 38.

Good sound but poor color

Poor picture

Horizontal dotted line

“Ghost” or double image

Snowy picture or noise

• Adjust the contrast, color, and brightness

settings. See “Adjusting the TV picture”

on page 23.

• Make sure that the room is not too bright.

Light reflecting off the screen can make

the picture difficult to see.

• If an S-VHS camera or a camcorder is

connected while another connected

device is turned on, the picture may be

poor. Turn off one or more devices.

• Your TV may be too close to another

electrical device, such as a hair dryer or

neon light. Turn off the device or move

your TV.

• Obstructions, such as high-rise building or

hills, may be preventing your antenna

from receiving a clear signal. Using a

highly directional antenna may improve

the picture quality.

• Make sure that the AV and antenna cables

are connected securely.

Specifications

Design specifications are subject to change without notice. Dimensions and weight specifications are approximate.

LCD panel

NS-26L450A11:

 

26-inch active matrix full high- definition TFT

 

NS-32L450A11:

 

32-inch active matrix full high- definition TFT

 

 

Resolution

1920 × 1080 (RGB vertical stripe)

 

 

Color

8 bit / 1.07 B

 

 

Viewing angle

178° horizontal/178° vertical

 

 

Contrast ratio

2500:1

 

 

Brightness (typical)

450 nits

 

 

Response time

8.0 ms

44

www.insigniaproducts.com