26"/32" LCD, 1080p

Install the stand or wall-mount bracket

To set your TV on a cabinet or other flat surface, you must install the stand.

To mount your TV on a wall or other vertical surface, you must remove the stand.

Warning

Make sure that you unplug the AC power cord before you install or remove the stand.

Cautions

Read these instructions carefully before you try to install the stand or a wall-mount bracket.

If you are not sure you can install the stand or wall-mount bracket, consult a professional installer or service personnel. Your warranty does not cover damages or injuries that happen due to mishandling or incorrect assembly.

When installing the stand or wall-mount bracket, make sure that you place your TV on a soft cushion or covering to prevent scratching or damage to your TV’s finish or screen.

Installing the stand

To install the stand:

1Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and scratches.

2Align the stand on the TV base, then insert the metal tabs on the stand into the designated slots on the TV base.

Metal tabs

Stand

3Secure the stand with the three M4 × L14 mm screws (provided).

Installing a wall-mount bracket

To attach your TV to a wall-mount bracket:

1Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and scratches.

2Remove the the three screws holding the TV to its stand, then remove the stand.

3Secure the wall mount bracket to the back of your TV using the four screws provided with the bracket.

7.87in. (200 mm)

3.94 in. (200 mm)

www.insigniaproducts.com

5