Insignia NS-3IN1MT50C, NS-3IN1MT50C-C

3-in-1 TV STAND

www.insigniaproducts.com

Step 6

: Attach the shelves

1Insert the suction cups (S) into the top holes and the metal tabs of the crossbars and stringers, the bottom

stringer (J) (4 cups). Upper crossbars and stringers (E, F, G and H) and bottom brace (I) (3 cups each).

TIP: If a suction cup resists insertion, try pressing down on the middle of the cup with the hex wrench while twisting it

clockwise into the hole, as if you were screwing it in.

2Place the top glass shelf (K) with the black side down onto the suction cups on the top crossbar (E) and stringer

(F).

3Place the middle glass shelf (L) with the black side down onto the suction cups on middle crossbar (G) and

stringer (H).

4Place the bottom glass shelf (M) with the black side down onto the suction cups on bottom brace (I) and

stringer (J).

Note: For Wall Mount assembly, see “WALL MOUNT ASSEMBLYINSTRUCTIONS” on page 14. For Table Top final

assembly, continue to the next step.

You’ll need:

S (19)

NS-3IN1MT50C-NS-3IN1MT50C-C_14-0478_MAN_V2_ENG.fm Page 12 Wednesday, May 7, 2014 1:33 PM