19
3-in-1 TV STAND
www.insigniaproducts.com
Step 4
: Option 2 - Mount the frame to a block or concrete wall
1Place the mounting frame (P) against the wall where you intend to mount the TV. Use a level to make sure the
mounting frame (P) is level, then mark the four mounting holes on the wall. Never locate the mounting holes
into the mortar between blocks. Remove the mounting frame.
2Drill four 7/16" (11 mm) holes through the screw marks to a depth of 2.5" (64 mm).
3Insert a concrete anchor (CC) into each of the screw holes using a hammer.
4Align the mounting frame over the concrete anchors.
5Place a washer (BB) over one of the mounting frame screw holes, then insert a lag bolt (AA) and tighten.
6Repeat the previous step for the other three screw holes.
CAUTION: Make sure that the lag bolts are tight and secure, but do not overtighten them.
AA BB
CC
2.50”
(64 mm)
0.43”
(11 mm)
You’ll need:
AA (4)
BB (4)
CC (4)
Hammer
Level
7/16” masonry
drill bit
Drill
Pencil
1/2” Socket wrench
NS-3IN1MT50C-NS-3IN1MT50C-C_14-0478_MAN_V2_ENG.fm Page 19 Wednesday, May 7, 2014 1:33 PM