Insignia NS-3IN1MT50C, NS-3IN1MT50C-C ASSEMBLY INSTRUCTIONS

3-in-1 TV STAND

www.insigniaproducts.com

ASSEMBLY INSTRUCTIONS

Step 1: Align and attach the left and right side frames (A and B) to the

back frame (C)

Caution: Assemble your stand on a carpeted floor or the empty carton to avoid scratching your stand.

1Insert two 1 3/8" bolts (U) through both lock washers (X) and flat washers (Y) through the drilled holes on the

left side frame (A) and screw into the threaded holes on the side of the short back frame (C).

2Repeat the same procedure to attach the right side frame (B).

NOTE: Do not fully tighten all bolts until you finish assembling all parts. Once assembled, go back and fully tighten all

bolts. This will make the assembly easier.

You’ll need:

U (4) X (4) Y (4) EE (1)

NS-3IN1MT50C-NS-3IN1MT50C-C_14-0478_MAN_V2_ENG.fm Page 7 Wednesday, May 7, 2014 1:33 PM

Contents

Main SAFETY INFORMATION AND SPECIFICATIONS Page PACKAGE CONTENTS: PARTS Make sure that you have all the parts necessary to assemble your new TV stand. PACKAGE CONTENTS: HARDWARE PACKAGE CONTENTS: HARDWARE (continued) ASSEMBLY INSTRUCTIONS Page Page Page Page Page FINAL TABLE TOP ASSEMBLY INSTRUCTIONS WALL MOUNT ASSEMBLYINSTRUCTIONS Step 1: Select the correct bolts, washers, and spacers for your TV. Page Step 3 : Option 1 - Mounting bracket instructions for a TV with a flat back Step 3 : Option 2 - Mounting bracket instructions for a TV with an irregularly shaped or obstructed back Step 4 : Option 1 - Mount the frame to a stud wall Step 4 : Option 2 - Mount the frame to a block or concrete wall Page Page SWIVEL STAND ASSEMBLY INSTRUCTIONS Page Page Page Page Page Page CARE AND MAINTENANCE Wood/Laminate Glass WARNING ONE-YEAR LIMITED WARRANTY - INSIGNIA Definitions: How long does the coverage last? What does this warranty cover? How to obtain warranty service?