Insignia NS-3IN1MT50C, NS-3IN1MT50C-C

3-in-1 TV STAND

www.insigniaproducts.com

Step 5

: Attaching the TV to the mounting frame on the wall

1Lift the TV up to the mounting frame (P).

2Set the hooks on TV brackets (Q) over the mounting frame, then lower the hooks onto the bars on mounting

frame.

3Center the TV, then secure it in place using a screwdriver to tighten the safety bolt on the bottom hooks.

4Place the stand with the glass shelves under the TV.

Tighten until the safety

bolt hits the underside

of the mounting frame.

Note: In this step the mounting frame has

already been mounted to the wall. This

illustration shows the TV from the back view

for clarity.

You’ll need:

Phillips screwdriver

NS-3IN1MT50C-NS-3IN1MT50C-C_14-0478_MAN_V2_ENG.fm Page 20 Wednesday, May 7, 2014 1:33 PM

Contents

Main SAFETY INFORMATION AND SPECIFICATIONS Page PACKAGE CONTENTS: PARTS Make sure that you have all the parts necessary to assemble your new TV stand. PACKAGE CONTENTS: HARDWARE PACKAGE CONTENTS: HARDWARE (continued) ASSEMBLY INSTRUCTIONS Page Page Page Page Page FINAL TABLE TOP ASSEMBLY INSTRUCTIONS WALL MOUNT ASSEMBLYINSTRUCTIONS Step 1: Select the correct bolts, washers, and spacers for your TV. Page Step 3 : Option 1 - Mounting bracket instructions for a TV with a flat back Step 3 : Option 2 - Mounting bracket instructions for a TV with an irregularly shaped or obstructed back Step 4 : Option 1 - Mount the frame to a stud wall Step 4 : Option 2 - Mount the frame to a block or concrete wall Page Page SWIVEL STAND ASSEMBLY INSTRUCTIONS Page Page Page Page Page Page CARE AND MAINTENANCE Wood/Laminate Glass WARNING ONE-YEAR LIMITED WARRANTY - INSIGNIA Definitions: How long does the coverage last? What does this warranty cover? How to obtain warranty service?