Insignia
Your TV has a 75 ohm jack for connecting cable TV.
Some cable TV providers scramble the signals for “premium” (pay) channels. To view these channels you need a converter/descrambler box.
If you do not have a converter/descrambler box, you can connect your cable TV directly to your TV. If you have a converter/descrambler box, you can connect your cable TV using an RF switch (not supplied). For more information about connecting a converter/descramble box, contact your cable TV provider.
To connect cable TV without a converter/descrambler box:
1Connect one end of a 75 ohm cable to the coaxial jack on the back of your TV.
2Connect the other end of the cable to the cable TV wall outlet.
To connect cable TV with a converter/descrambler box:
•Use the following illustration to connect a converter/descrambler box. (The RF switch and the signal splitter are not provided.)
Set the RF switch to the A position to watch unscrambled channels using your TV remote control. Set the RF switch to the B position to watch scrambled channels using the converter/descrambler controls.
RF switchTwo-set signal splitter
A
B |
|
|
|
| In |
| Out |
|
|
| |
|
|
| |||
|
|
|
|
|
Use the following illustration to connect an audio processor or
Warning
Make sure that you turn off and unplug your TV before installing devices.
Note
For home theater systems, use an S/PDIF cable to achieve full sound capabilities.
S/PDIF cable
S/PDIF IN jack
Audio processor
Cable converter/descrambler box
10 |