Insignia NS-42EPTV Programming the remote, control, Programming a device connected to your

							Insignia NS-42EPTV 42” Plasma TV
					4 Press and hold the SET button on the remote
On-screen		Options
						control until the LED blinks twice, then
menu
						release the button.
Setup		Tuning Band–Selects the TV signal source. For			5 Enter the first five-digit code for your device.
		more information, see “Selecting the TV				The LED blinks once as each digit is entered.
		source” on page 14.
						If the code is correct, the LED blinks twice.
		DTV Signal–Displays the digital TV signal
		strength. For more information, see “Checking
		the DTV signal strength” on page 15.				Note
		Auto Ch Search–Automatically sets up a list of					If the LED does not blink twice, repeat steps 3
							through 5 using a different code.
		the channels available in your area. For more
		information, see “Automatically setting up			6 Aim the remote at the device, then press the
		channels” on page 14.					button.The device should turn off.
		Manual Ch Set–Lets you add or delete
		channels from the channel list. For more
		information, see “Manually adding or deleting				Note
		channels from the channel list” on page 14.					If the device does not turn off, repeat steps 4
		Channel Labels–Lets you add a label to a					through 6 using a different code. If you cannot find
							a code that works, see “Searching for a code” on
		channel. For more information, see “Adding a					page 18.
		channel label” on page 15.
					7 Repeat steps 1 through 6 to program
Feature		Source–Selects the video source. You can
						additional devices.
		select:
					8 Press the SET button to save the code and
			•	TV
			•	Composite1		exit.
			•	Composite2	Searching for a code
			•	VGA
			•	HDMI	To search for a code:
			•	S-Video
		You can also press the INPUT button to select			1 Press a device key.
		the video source.			2 Press and hold the SET button until the LED
		Time Set–Sets the clock. For more
						blinks twice, the release the button.
		information, see “Setting the clock” on
		page 15.			3 Enter 991, then the device group number
		Sleep Timer–Sets the sleep timer. For more				(0=cable, 1=TV, 2=VCR, 3=audio). The LED
		information, see “Setting the sleep timer” on				blinks twice.
		page 16.			4 Aim the remote control at the device, then
		Parental Controls–Access V-chip controls. For
						press the		button. If the device responds,
		more information, see “Setting parental
						go to step 7.
		controls” on page 16.
		Closed Caption Options–Customizes closed			5 If the device does not respond, press the
		captions for digital broadcasting systems. You				CH+ button. Your remote control will try the
		can adjust Size, Font, Text Color, Text Opacity,				next code. Keep pressing the CH+ button
		Background Color, Background Opacity, Edge				until the device responds. You can press the
		Effect, and Edge Color.
						CH– button to try a previous code.
		CC when Mute–When this option is turned on,
					6 To search for a code for another device,
		your TV automatically displays closed captions
		when the volume is muted.				repeat steps 1 through 5.
		Menu Language–Select the language for the			7 Press the SET button to save the code and
		on-screen menu system. You can select				exit.
		English, French, or Spanish.
					Checking the code
Programming the remote
					If you programmed a device by searching for a
control					code, you may want to know what four-digit code
					the remote is using.
Programming a device connected to your					To check the code:
TV					1 Press the device button on the remote
	The remote control can control four devices,					control.
	such as a VCR, DVD player, cable or satellite				2 Press and hold the SET button until the LED
	receiver, amplifier or tuner, or similar device.					blinks twice, then release the button.

To program the remote control:	3	Enter 990. The LED blinks twice.
	4	Press 1 and count the LED blinks. This is the
1 Find the code for the device you want to
		first digit of the code. For example, if the LED
program. See “Appendix” on page 20. If there
		blinks twice, the first digit is 2. If the LED
is more than one code listed for a device,
		does not blink, the first digit is 0.
write down all the codes.
	5	Repeat step 4 using 2 for the second digit, 3
2 Turn on the device you want to program, and
		for the third digit, 4 for the fourth digit, and 5
load media if required, for example a DVD.
		for the fifth digit.
3 Press a device key on the remote control, for
	6	Press the SET button to exit.
example, DVD, CBL, or AUX.

18 www.insignia-products.com