Insignia NS-42PDP Changing channels, Adjusting the volume, Displaying status information, Selecting a digital sub-channel

Insignia NS-42PDP 42” Plasma TV

Automatically setting up channels	3 Press the or button one or more times
	to highlight Manual Ch Set.

To automatically set up the channel list:

1Press the MENU button.

2 Press the or button one or more times to highlight Setup, then press the OK or button to open the Setup menu.

	4	Press the OK or	button to access the




		Manual Ch Set options.
	5	Press the or	button to select a channel,
		then press the OK button to add or delete a
		channel. If a channel is in the channel list, it
		channel. If a channel is in the channel list, it
3 Press the or button one or more times		will have a mark beside it.
to highlight Auto Ch Search.	6	Press the EXIT button to close the menu.

4Press the OK or button to start the search.

Note

You can press the Exit button to stop the search.

Manually adding or deleting channels from the channel list

After you create a channel list using the Auto Ch Search option, you can manually add or delete channels from the channel list.

To add or delete channels:

1Press the MENU button.

2Press the or button one or more times to highlight Setup, then press the OK or button to open the Setup menu.

Changing channels

To change channels:

•Press the CH or button on the front of your TV or the CH – or + button on the remote control to go to the next lower or higher channel.

Press the number buttons to select a channel. For example, if you want channel 83, press 8, then press 3.

Press the button to go to the last viewed channel.

Selecting a digital sub-channel

Most digital TV channels have more than one channel. The main channel carries the signal for the main TV program. The sub-channels carry signals for additional or alternate programming, such as a radio or news broadcast.

For example, if the main channel number is 8, the sub-channel might be 8-1, 8-2, and 8-3.

To select a sub-channel:

1Press the number buttons for the main channel, for example 8.

2Press the – button, the press the sub-channel button, for example 1.

Adjusting the volume

To adjust the volume:

•Press VOL or button on the front of your TV or the VOL – or + button on the remote control to decrease or increase the volume.

•Press the MUTE button to turn off the sound. Press the MUTE button again to turn the sound back on.

Displaying status information

To display status information:

•Press the INFO button. Your TV displays status information, such as the channel number or signal source.