Insignia NS-BDLIVE01 Selecting the PCM downsampling rate, To select the PCM downsampling rate

NS-BDLIVE01_09-0086_MAN_V1_ENGLISH.book Page 15 Wednesday, March 11, 2009 9:37 AM

Insignia NS-BDLIVE01 Blu-ray Disc Player

• Bitstream Legacy—Sends the original	Turning dynamic range control on or off
bitstream from disc over HDMI and SPDIF	Dynamic range control only works when your
using legacy audio formats. Blu-ray Disc audio
	player detects a Dolby Digital signal.
is limited to the soundtrack for main movie
and does not send PiP audio or audio effects.	To turn dynamic range control on or off:
• Bitstream mixed—Blu-ray Disc audio streams
	1 Press SETUP. The setup menu opens.
are mixed and encoded into a single
bitstream. Use this option if you are using an
SPDIF 5.1CH receiver and you want to enjoy
mixed Blu-ray Disc audio in surround sound.

5 Press to save your selection and return to the previous menu level.

Or

Press SETUP to close the setup menu.

Selecting the PCM downsampling rate

To select the PCM downsampling rate:

1Press SETUP. The setup menu opens.

2Press or to select Audio, then press to move to the list of options.

3Press or to select PCM Downsampling, then press .

4Press or to select 48KHz, 96KHz, or Off.

5Press to save your selection and return to the previous menu level.

Or

Press SETUP to close the setup menu.

2Press or to select Audio, then press to move to the list of options.

3Press or to select Dynamic Range Control, then press .

4Press or to select:

•On—Select this option if you play movies at low volume or if you have small speakers. Your player using compression to make low-audio content easier to hear and prevent high-audio content from getting to loud.

•Off—Select this option to listen to movies at the dynamic range they were recorded in.

5Press to save your selection and return to the previous menu level.

Or

Press SETUP to close the setup menu.

Note

If you set the PCM downsampling rate incorrectly, audio output may be unpredictable.

www.insigniaproducts.com 15