2Swing the LCD screen down into viewing position and turn the screen to a convenient viewing angle.
3Press the POWER button to turn on your TV.
4Press the FUNCTION button one or more times until TV appears on the display.
5Press the one of the TV CHANNEL buttons (up or down), or press the number buttons on the remote control to select a channel.
Note If you’re using your TV for the first time, you must program the available TV channels into memory. See “Programming TV channels into memory” on page 13.
6Press one of the VOL buttons (+ or
Programming TV channels into memory
To program TV channels into memory:
1After connecting the antenna and turning on the power, press the MENU button on your radio twice. The TUNING menu opens.
2Press the NAVIGATION button repeatedly until AUTO SCAN is selected.
3Press the TV CHANNEL DOWN button to begin the auto scan process. Auto scan takes a few minutes to complete.
4Press the MENU button again to close the
Adjusting the TV picture
To adjust the TV picture:
1With the TV on, press the MENU button. The PICTURE menu opens.
2Press the NAVIGATION button to select each the following picture elements, then press TV CHANNEL UP or DOWN to adjust:
•BRIGHTNESS
•CONTRAST
•SHARPNESS
•COLOR
•HUE
•DISPLAY (4:3 or Fullscreen)
•DEFAULT (resets adjustments to factory default settings)
3Press the MENU button again to close the