•Press one of the SKIP/CLOCK/TUNING buttons (up or down) on the clock radio, or press one of the SKIP/TUNE
/ 
buttons on the remote to go to the next or previous track on the CD.
•Press one of the SKIP/CLOCK/TUNING buttons (up or down) on the clock radio, or press one of the SKIP/TUNE
/
buttons on the remote to search for a track on the CD.
•Press the MEM/CLK SET/RAND button on the remote to select Random playback mode.
8Press the STOP/BAND button to stop playback.
Connecting an external audio/video input device
To connect an external audio/video input device:
1Make sure that your radio is turned off and unplugged from the power outlet.
2Plug the yellow connector of an audio/video cable (not included) into the VIDEO IN jack on the left side of your clock radio.
3Plug the left (white) and right (red) connectors of an audio/video cable (not included) into the L and R AUDIO IN jacks on the left side of your clock radio.
From Audio Left | From Video |
(white) output | (yellow) output |
From Audio Right (red) output
4Plug the other end of the audio/video cable into the Video and Audio Out jacks on the audio/video input device.
5Plug the AC power cord into a power outlet, then press the POWER 
button to turn on your radio.
6Press the FUNCTION button one or more times until AV appears on the display.
7Turn on the external audio device and use the device’s controls to control playback.
16www.insignia-products.com