Insignia NS-LCD19F Maintaining, Troubleshooting, Cleaning your TV, menu, Options, Symptom, Possible solution, Possible solution

							Insignia NS-LCD19F 19” LCD TV
On-screen			Options			Symptom	Possible solution
menu
						No picture	• Make sure that the video cables
TV			Program no.–Selects the channel number.				are connected securely to the
			Tuning Mode– Selects the TV signal mode to				back of your TV.
							• Adjust the contrast and
			Air or Cable.
							brightness.
			TV System–Selects the TV system. Options
							• Make sure that the correct video
			include NTSC-M,PAL-M,PAL-N, and Auto. We
							mode is selected.
			recommend that you set it to Auto.
							• Make sure that the incoming
			Auto Search–Automatically searches for all
							signal is compatible.
			available channels. When the search is				• Make sure that the antenna is
			complete, your TV stays at the first channel				connected correctly.
			with a signal and all channels that have been				• Check the closed caption settings.
			located are stored. To stop Auto Search in				Some TEXT modes can block the
			progress, press the MENU button.				screen.
			Fine Tuning–Adjusts the frequency of the
						Good picture but no	• Increase the volume.
			current channel when you finish Auto Search.
						sound	• Make sure that the sound is not
			Use only for channels with poor reception.
							muted.
			AFC–Turns AFC ON or OFF. When this option is
							• Make sure that the correct audio
			set to ON, AFC automatically adjusts the
							mode is selected.
			channel for best reception.
						Good sound but poor	• Adjust the contrast, color, and
			Skip–Sets Skip to ON or OFF. When Skip is set
						color	brightness settings.
			to ON for a channel, that channel is skipped
			when you press the CH+ or CH- key on the			Poor picture	• Make sure that the room is not
			remote control or on the TV.				too bright. Light reflecting off the
			Reset to default–Resets all items in TV page to				screen can make the picture
			the factory default value.				difficult to see.
							• If an S-VHS camera or a
Maintaining
							another connected device is
							camcorder is connected while
	• Do not use your TV in areas that are too hot						turned on, the picture may be
							poor. Turn off one or more
		or too cold, because the cabinet may warp or
							devices.
		the screen may malfunction.
						Horizontal dotted line	• Your TV may be too close to
		• Storage temperatures are 32° to 122°F
							another electrical device, such as
		(0° to 50°C).
							a hair dryer or neon light. Turn off
		• Working temperatures are 41° to 104°F					the device or move your TV.
		(5° to 40°C).
						“Ghost” or double	• This may be caused by
	• Do not place your TV in direct sunlight or
						image	obstructions to the antenna, such
		near a heat source.					as high-rise buildings or hills. Use
Cleaning your TV							of a highly directional antenna
							may improve the picture quality.
	Clean the screen and cabinet with a soft,
						Remote control does	• Press the TV button.
	lint-free cloth. If the screen or cabinet is					not work	• Replace the batteries. Make sure
	especially dirty, moisten a soft, lint-free cloth in a						that the + and – symbols on the
	weak detergent solution, squeeze the excess						batteries align with the + and –
	moisture from the cloth, then wipe the screen or						symbols in the battery
	cabinet with the cloth. Use a clean cloth to dry						compartment.
	the screen or cabinet.						• Clean the remote sensor on the
							front of your TV.
							• Bright or fluorescent lighting may
		Caution					interfere with the remote control
		Avoid the following, because it may cause damage					signal. Turn off the light or move
		to your TV:					your TV.
		• Cleaning your TV with volatile substances,
			such as insect sprays, solvents, and thinners.			Snowy picture or noise	• Make sure that the A/V and
		• Leaving items made from rubber or PVC in					antenna cables are connected
			contact with your TV for long periods.				correctly and securely.
		• Letting liquids drip into the cabinet
						VGA picture is not	• Make sure that you have selected
Troubleshooting						stable or synchronized	the correct VGA mode on your
							computer.
						No output from one of	• Adjust the balance in the Sound
						the speakers	menu.
		Warning
		Do not try to repair your TV yourself. Refer all				Control buttons do not	• Unplug the power cord, wait a few
		service to a qualified service technician.				work	seconds, then plug the cord back
							in and turn on your TV.
	Symptom			Possible solution		After images appear	• Do not display a still image, such
							as a logo, game, or computer
	No power			• Make sure that the power cord is			image, for an extended period of
				connected to your TV and a power			time. This can cause a permanent
				outlet.			after image to be burned into the
				• Unplug the power cord, wait 60			screen. This type of damage is not
				seconds, then plug the cord back			covered by your warranty.
				in and turn on your TV.
10					www.insignia-products.com