Insignia NS-LCD19F Using your TV, Connecting to an external signal source, Connecting a computer, Turning your TV on and off, For, VGA, PLAY, INPUT, INPUT, POWER, POWER, S-Video

Insignia NS-LCD19F 19” LCD TV

To connect cable TV without a converter/descrambler box:

1Connect one end of a 75 ohm cable to the coaxial jack on the back of your TV.

2Connect the other end of the cable to the cable TV wall outlet.

To connect cable TV with a converter/descrambler box:

•Use the following illustration to connect a converter/descrambler box. (The RF switch and the signal splitter are not provided.)

Set the RF switch to the A position to watch unscrambled channels using your TV remote control. Set the RF switch to the B position to watch scrambled channels using the converter/descrambler controls.

TV

		RF switch		Two-set signal splitter
		A					Y R			W R
		B
			Out	In
	TV
					PC IN		AV IN			COMPONENT IN
								R
					POWER
		Cable converter/descrambler box			AUDIO	VGA
Connecting to an external signal source								L
	You can connect a DVD, VCD, or VCR using a
	variety of methods, including composite cables,
	component cables, or an S-Video cable. The
	S-Video cable does not carry sound. If you use
	an S-Video cable, you need to use audio cables
	to connect the audio output.				VGA Audio
							Video Composite		Video Component
					input
						VGA
		Warning				input	input rear		input
		Make sure that you turn off and unplug your TV
		before connecting devices.

Note

For better video, use the S-Video jack if your VCR has an S-Video connection.

To connect an external signal source:

1Make one of the following connections:

•For composite video—Plug the audio/video cable into the AUDIO L, AUDIO R, and VIDEO in jacks on the back of your TV.

•For S-Video—Plug in the audio cables as described above, then plug one end of an S-Video cable into the S-VIDEOjack on the back of your TV and the other end into the S-Videojack on the external signal source.

•For component video—Plug the Y, Pb, and Pr video cables and the Audio L and Audio R cables into the component input jacks.

2Turn on your TV.

3Press the INPUT button repeatedly to select the external signal source you want to watch.

4Turn on external signal source.

5Insert a disc or videotape into the external signal source, then press the PLAY button.

Connecting a computer

Warning

Make sure that you turn off and unplug your TV before installing devices.

To connect a computer:

1Plug a VGA cable from your computer into the VGA jack on the back of your TV.

2Plug an audio cable from your computer’s audio out jack into the PC IN AUDIO jack on the back of your TV.

3Plug in and turn on your TV.

4Press the INPUT button repeatedly, or press the PC key on the remote control, to select the PC source.

Using your TV

Turning your TV on and off

To turn your TV on and off:

1Make sure that the AC power cord is connected to your TV and to a power outlet.

2Press the POWER button to turn on your TV. The power indicator LED turns green.

3Press the POWER button again to return your TV to standby. The power indicator LED turns orange.

www.insignia-products.com 5