8
Insignia NS-LCD26F/NS-LCD32F/NS-CL26C LCD TV
www.insignia-products.com
2Connect RCA video and audio cables from
the DVD player to the VIDEO and AUDIO IN
jacks on the back of your TV.
• Yellow - Video
• White - Audio left
• Red - Audio right
- OR -
Connect an S-Video cable and audio cables
from the DVD player to the S-VIDEO and
AUDIO IN (L and R) jacks on the back of your
TV.
• White - Audio left
• Red - Audio right
- OR -
Connect RCA cables to the DVD’s
COMPONENT VIDEO Out jacks and the
AUDIO OUT jacks (L and R), then to the
COMPONENT IN jacks (Y, Cb/Pb, and Cr/Pr)
and the AUDIO IN (L and R) jacks on the
back of the TV.
3Turn on the TV and the VCR.
4Press the INPUTbutton to set the TV’s signal
input to S-VIDEO or YPBPR (as
appropriate).
To connect your TV to a DVD player with an
HDMI cable:
1Turn off the TV and the DVD player.
2Connect an HDMI cable to the HDMI output
jack on the DVD player, then connect it to the
HDMI jack on your TV.
3Press the INPUT button to set the TV’s signal
input to HDMI.
Connecting to a cable box
To connect your TV to a cable box with an RF
cable:
1Turn off the TV and the cable box.
2Connect a 75 ohm RF cable from the cable
box to the ANT. jack on the back of your TV.
3Set the cable box output switch to channel 3
or 4, then tune your TV to the same channel.
4Turn on the TV and the cable box.
5Change channels at the cable box or with the
cable box remote.
To connect your TV to a cable box with a AV
cables:
1Turn off the TV and the cable box.
2Connect RCA video and audio cables from
the cable box to the VIDEO and AUDIO IN
jacks on the back of your TV.
• Yellow - Video
• White - Audio left
• Red - Audio right
3Turn on the TV and the cable box.
4Press the INPUT button to set the TV’s signal
input to AV or S-VIDEO.
5Change channels at the cable box or with the
cable box remote.
Connecting to a computer
To connect a computer video source to the
VGAjacks:
1Connect a VGA cable from the computer to
the VGA jack on the TV.
2Connect a male-to-male audio cable from the
computer to the PC AUDIO IN port on the TV.
3Turn on the TV, then turn on the PC.
4Press the INPUT button to set the TV’s signal
input to VGA.