Insignia NS-LTDVD26-09CA manual Setting up your TV, To connect a standard video device to

08-1156 NS-LTDVD26-09CA - combined.fm Page 10 Tuesday, April 1, 2008 1:25 PM

Insignia NS-LTDVD26-09CA 26" LCD TV/DVD Combo

Setting up your TV

Connecting an antenna, cable TV, or satellite TV

Connecting a standard video device

Note

Your TV supports multiple video source inputs. For temporary or easy-access video connections, use the side jacks (AV2). For more permanent connections, use the rear jacks (AV1).

RF INPUT

To connect an external antenna, cable TV, or satellite TV:

1 Remove the port cover from the back of your TV (1).

2 Plug the antenna cable (2) from an antenna, cable TV, or satellite receiver (3) to the RF INPUT jack on your TV.

3Replace the port cover on the back of your

	TV.
	4 Turn on your TV.				To connect a standard video device to the
	5 Press INPUT, then press	/	to select TV.		AV1 INPUT jacks:
				1		Remove the port cover (1) from the back of
						your TV.
				2		Plug an RCA video cable (4) into a standard
						video source (5) and into the VIDEO jack on
						the back of your TV.
				3		Plug the RCA audio cables (2) into the video
						device's audio output jack and into the upper
						AUDIO L and AUDIO R jacks on the back of
						your TV.
				4		Turn on your TV.
				5		Press INPUT, then press	/	to select AV1.
					To connect a standard video device to the
					AV2 INPUT jacks:
				1		Remove the port cover (1) from the back of
						your TV.
				2		Plug an RCA video cable (8) into a standard
						video source (5) and into the VIDEO jack on
						the side of your TV.
				3		Plug the RCA audio cables (7) into the video
						device's audio output jack and into the upper
						AUDIO L and AUDIO R jacks (6) on the side
						of your TV.
				4		Turn on your TV.
				5		Press INPUT, then press	/	to select AV2.
10			www.insignia-products.com