Insignia NS-LTDVD26-09CA Connecting a component video device, Connecting digital audio output

08-1156 NS-LTDVD26-09CA - combined.fm Page 11 Tuesday, April 1, 2008 1:25 PM

Insignia NS-LTDVD26-09CA 26" LCD TV/DVD Combo

To connect a standard S-Video device to AV1 INPUT jacks:

1Remove the port cover (1) from the back of your TV.

2Plug an S-Video cable (3) into the S-Video out jack on an S-Video device (5) and into the S-VIDEOjack (1) on the back of your TV.

3Plug RCA audio cables (2) into the S-Video device audio output jacks and into the AUDIO L and AUDIO R jacks on the back of your TV.

4Turn on your TV.

5Press INPUT and / to select S-Video.

Connecting a component video device

To connect a progressive-scan or HDTV video source to Y/Pb/Pr jacks:

1Remove the port cover (1) from the back of your TV.

2Plug a component video cable (4) into the progressive-scan or HDTV video device (3) and into the Y/Pb/Pr jacks (1) on the back of your TV.

3Plug the RCA audio cables (2) into the audio out jacks on progressive-scan or HDTV video device and into the lower AUDIO L and AUDIO R jacks on the back of your TV.

4Turn on your TV.

5Press INPUT, then press / to select

YPBPR.

Connecting digital audio output

You can connect your TV audio output to a digital amplifier.

To connect to a digital audio amplifier:

1Remove the port cover from the back of your TV.

2Plug a coaxial cable (2) into the amplifier (3) and into the COAXIAL jack (1) on the back of your TV.

www.insignia-products.com 11