NS-WBRDVD2/NS-WBRDVD2-CA Wireless Blu-ray Disc Player

Connecting to your home network

6 Press

or to select the wireless network you

 

 

 

want your player to connect to. A Network Setup

 

Note

screen opens with the following options:

 

 

This player can be connected to your wired network

• Connect—Connect to this network.

 

 

using the Ethernet port on the back of your player or

• Disconnect—Disconnect from this network.

 

 

by using a wireless network.

 

 

 

• Delete—Delete the current network.

Connecting using a wireless network

• WPS Pin—Create a random PIN number

Another connection option is to use an access point

password.

7 If your network does not use encryption, press

or a wireless router as shown in the example below.

To connect to the Internet with a wireless

or

to select Connect, then press ENTER. If

the wireless network is working, you should see

network:

a checkmark and a connected message on the

1 Set up your access point or wireless router (if not

TV. If the message does not appear, repeat the

already set up).

steps above.

OR

Player

Wireless router

2Press ENTER. The Settings menu opens.

If your network uses encryption:

1Press or to select the Password field, then press ENTER. An on-screen keyboard opens.

2Press or to select the first letter in the password, then press ENTER. Repeat this step to enter the rest of the password. If you make a mistake, use backspace key to delete the character.

3After you enter the password, select the circled X in the upper right-hand corner of the keyboard, then press ENTER to close the keyboard.

4Press or to select Connect, then press ENTER. If the wireless network is working, you should see a checkmark and a connected message on the TV. If the message does not appear, repeat the steps above.

To connect to a wireless network using Wi-Fi Protected Setup (WPS), see “Setting up WiFi protection (WPS)” on page 20.

Connecting using a wired network

3Press or to select Network, then press

ENTER.

4Press or to select Wireless, then press ENTER. The Wireless Settings screen opens.

To connect to the ethernet with a wired network:

1Connect a network cable to the INTERNET jack on the back of your player and into a wired router using a commercially available LAN or Ethernet cable (Cat 5 or better, with RJ45 connectors).

Back of player

Network cable

Wired router

5Press or to select Network List, then press ENTER. The Network List screen opens, showing a list of available wireless networks.

6

www.insigniaproducts.com